Key Won T Turn In Motorcycle Ignition

Agustus 29, 2021 Posting Komentar

Just yesterday I went to start it up and it took me about 10 minutes of finicking just to get the key to turn. The key still worked glued but when I removed the cas and took it to the key guy after I came back and put everything back the ignition cylinder seemed to lock.

How To Properly Fix Stuck Motorcycle Ignition Keys Kawasaki Z1000 Youtube

A firm outward tug with vise grips and a not too hard pull should free it if its not completely jammed.

Key won t turn in motorcycle ignition. I see no signs of any tampering with the bike so I am doubtful that anyone might have tried to steal it or something. As other have mentioned above this has happened to quite a few people and the symptoms you mention sound familiar. If the light doesnt come on then this suggests that there is a problem with the ignition switch itself.

Turn the key to the first click and see if the neutral light comes on. I have no Idea what to do I jiggle and wiggle and try to turn the wheel and nothing. Sometimes the key wont turn in the ignition cylinder because the steering wheel was moved around after the key was removed from the keyway after turning off the engine of the vehicle.

Other than that you may have to replace the ignition and then see about getting it either rekeyed to match your old key or getting the tank and the seat and helmet locks rekeyed. The kickstand is up I checked everything. Take out the connector to the main fuse and look for grit.

Jane opened the frunk and put her gear away jacket and gloves. You have to adjust the bars a little bit to take the pressure off the lock so that you can get the key to turn in the ignition. Key wont turn While on a trip today we stopped for lunch.

If your engine wont start then you should check the ignition switch. Luckily Im parked in the street in front of my place. If this does not work jiggle the key.

If this does not work add more lubricant and repeat. Ignition switch jammed. It will go into the key hole just fine but it wont turn.

Check your main fuserelay again the one under the skidplate on the right side of the bike. The key will move freely to the parking lights and Lock positions but wont turn past the On. Key wont turn in ignition forks lockedneed to change ignition barrel and remove upper triple tree Its a yamaha yzf r6 Posted by Jonathan Lundeen on Jan 04 2016.

Insert the key and turn it. Its hard for solvent or lube to get past the key. Gather your lubricant key and cloth.

For reference its a 2017 Honda CRF250L Rally. That or gunk stuck deep inside the switch. If this is the case then the entire switch needs to be replaced.

1 jiggle the steering wheel and the cars shifter 2 check if the battery is charged 3 try a spare key 4 spray silicon spray into the ignition and 5 jiggle the key andor tap the key slightly. My 2006 GSXR 600 key wont turn the ignition. Wipe away the overspray or anything leaking from the keyhole.

For the last few weeks its become harder and harder to get the key to turn all the way to lock the steering. To get your key to turn the ignition try these methods to free the ignition. It may be that there is a broken tooth on either the key or the switch.

Examine the key for signs of excessive wear rounding or broken teeth. Key wont turn in ignition. It wont turn to allow the bike to turn on or to engage the lock.

Any suggestions or help would be much appreciated. Just be sure to pull straight out and not side to side for obvious reasons. I sprayed a little WD-40 into the key hole but it didnt help.

The keys work on the door and trunk but the ignition wont turn not even with the original key. I cannot get it to start since the key wont turn from the On position to Ignite. Also I would double check that the 30A fuse is ok.

If something got in the cylinder I have probably mashed it to hell trying to get the key to turn. If your key wont turn when you insert it into the ignition it may be because the key has been damaged and no longer engages the correct pins to the depth necessary to spin the cylinder. Pull the left handle bar to turn the bars o full left lock insert the key push in turn the key clockwise into the on position.

Spray the lubricant into the keyway of the ignition cylinder. The mechanical interaction between the movement of the steering wheel and the keyway lock might have caused it to lock up and prevent they key from turning. The steering lock was under tension when you had not done this before thereby binding the mechanism when you attempt it.

With the key still in the ignition she attempted to open the seat but the key would not go far enough in to engage the seat latch cam cable. Hello I am in need of some help with my Suzuki GS500F. Any of these could result in the key failing to turn in the ignition.

Its in the locked position and Ive never had this problem before.

Here S Why Your Motorcycle Won T Kick Start Bike Restart